Rigid Foam Underlay Linear Drain wetroom kits

Four sizes of foam cored wetroom formers ready to fit on to a concrete or boarded timber floor. This is the best selling, budget type of wetroom kit complete with a high flow linear drain and tanking compound.

  • For tiling only.
  • Suitable for timber or concrete floors.
  • Wetroom floor former for perfect falls to the drain.
  • Under boarding required for spanning joists.
  • 22mm thick at the edges.
  • Easy to cut and trim on site to exact dimensions.
  • 600mm Living linear drain.
  • Standard drain projection beneath tray = 52mm
  • Optional 105mm drains with side front or vertical outlets.
  • Supplied with full tanking kit for the most reliable waterproof sealing.

See below for sizes available

Why our Foam Cored underlay is so special

We insist on extruded foam (not styrene balls)

Why density is important.

Our Underlay Wet floors and Tile Backer Boards are made from extruded foam (not agglomerated styrene particles). As a result the density weight loading is 30 tons per sq. metre. This may sound a lot, but gives us the confidence to permit use of tiny (25mm x 25mm) mosaic tiling. The maximum point load per tile is therefore 18.7Kg per 25mm x 25mm tile and customers can have total peace of mind that the tile will not sink into the underlay.

Note: Beware of competitor products with densities of 12 – 24 tons per sq. metre.

PCS wetrom former detail

Extra Tough Skin

Each side of the former is layered with a reinforcing mesh and covered in a continuous layer of polymer cement.

Liner wetroom tray kits c/w Living Linear Drains

The unique Living Linear drain (BBA approved) with patented NOOD no-odour trap: should the trap dry up, no smells or odours are permitted to leak into the room. Perfect for hotels or hospitals.

Living linear drain oultlet optionsThe Living Linear Drain
Choose your Gully type. The standard is the 52mm deep side outlet or to suit your waste pipe run select the optional 105mm deep side, end or vertical outlet.

The Trap is offset to the side of the drain to assist positioning waste pipes away from joists.

side view of living linear drain

  • Very high flow of water – 72 litres/minute (105mm options).
  • Mountings supplied for timber and concrete floors.
  • Accommodates tiles up to 10mm thick plus 3mm adhesive. Suitable for tiling only.
  • Tile insert or stainless steel designer grid options.
Standard Grid option for minimax

Foam cored wetroom deck with linear drain and TANKING kit contents:

1 - Foam cored deck former for level access.
1 - Living linear drain (please specify your choice of outlet and grid)
1 - Pipe reducer 2” to 11⁄2” (50mm to 40mm).
1 - 8k tanking liquid (covers 10m2).
1 - 1 Litre Primer for porous surfaces.
1 - 10m Tape for wall/floor joint & other gaps.
2 - Internal corners.
2 - Pipe collars.
1 - 75mm brush.

Note: The Foam Cored wetroom kit is not suitable for use with vinyl flooring.

But unlike competitor kits it can be used with 25mm square mosaic tiles.

Foam Cored Former Linear Wetroom Kit Deck sizes

Please Contact Us for prices and ordering

Note: All Foam Cored Linear decks can be cut down or shaped on-site.

850mm x 850mm
600mm linear drain

Lineardrain wetroom former 850mm x 850mm

1000mm x 1000mm
600mm linear drain

Lineardrain wetroom former 1000mm x 1000mm

1200mm x 900mm
600mm linear drain

Lineardrain wetroom former 1200mm x 900mm

1500mm x 900mm
600mm linear drain

Lineardrain wetroom former 1500mm x 900mm

1600mm x 900mm
800mm linear drain

Lineardrain wetroom former 1600mm x1000mm