MAXXUS Square Drain wetroom kits

Nine sizes of solid structural wetroom formers ready to fit directly to floor joists. This is the quickest type of kit to install. Available with tanking compound or sheet membrane and a choice of grid design.

model
  • Fast 1hr install
  • For tiling or vinyl
  • 3rd Generation Wet Deck/ Floor Former.
  • Rigid, structural over joists - no under boarding needed.
  • 22mm thick at the edges.
  • 50mm flat perimeter band, therefore the maximum showering area is 100mm less than the size shown.
  • Drain projection beneath tray = 77mm (horizontal outlet) or 127mm (vertical outlet).
  • Drain flow is 47 litres per minute.

See below for sizes available

Why MAXXUS is so special

Strongest in the world for its thickness (22mm). Others will take a 47 stone load and need under-boarding; they are designed for vinyl where flexing and bend are of no consequence. Maxxus takes 75 stone and prevents tile cracking.

  • Solid right through – no pockets or hollow cavities.
  • Fast 1 hour fit – no under-boarding.
  • May be trimmed by any amount.

animation of wetroom deck fitted on joists

Note: MAXXUS has a 50mm flat perimeter band so the support from the deck extends past the showering area. The maximum showering area is 100mm less than the size shown below.


Maxxus wetroom deck illustration

HUGE 470KG LOAD

THE STRONG ONE - MAXXUS has been tested under static load at 1000mm centres. Super-strong MAXXUS, made from vacuum formed GRP, will comfortably support a sustained load of 75 stone (470kilo) load over 16” (400mm) joist centres without deflection.

Minimax "nood" drain with cover and grid options for wetroomsMAXXUS Kits c/w MINIMAX Drains

The unique Minimax drain (BBA approved) with patented NOOD no-odour trap: should the trap dry up, no smells or odours are permitted to leak into the room. Perfect for hotels or hospitals.

New Minimax 2-part drain
A re-invention of the classic high-flow Minimax drain with NOOD trap. Permits waste pipe connection to drain before the Maxxus tray is lowered over the top. Upper retaining ring is then quickly screwed over the top.

  • Very high flow of water – 47 litres/minute.
  • Horizontal outlet projects only 77mm below MAXXUS, therefore minimal intrusion into sub-floor.
  • Vertical outlet available
  • Discreet tile insert option at no extra cost.
  • Suitable for tile or vinyl.
  • C/W reducer for 40mm solvent-weld pipe.

Choice of stainless steel gratings: Tile Insert, Platinum (solid steel plate option) or 6 designer grids.
Note 1: Round stainless steel option available.
Note 2: Tiling adaptor from original Minimax will fit – allows the use of Art Deco or Drop pattern or a 5mm thick Designer Grid pattern.

Standard Grid option for minimax

MAXXUS with TANKING kit contents:

1 - Maxxus for level access.
1 - Minimax drain c/w stainless grid. Horizontal or Vertical outlet (please specify).
1 - Pipe reducer 2” to 11⁄2” (50mm to 40mm).
1 - 8k tanking liquid (covers 10m2).
1 - 1 Litre Primer for porous surfaces.
1 - 10m Tape for wall/floor joint & other gaps.
2 - Internal corners.
2 - Pipe collars.
1 - 75mm brush.

MAXXUS with Membrane kit contents:

1 - Maxxus for level access.
1 - Minimax drain c/w stainless grid. Horizontal or Vertical outlet (please specify).
1 - Pipe reducer 2” to 11⁄2” (50mm to 40mm).
1 - BSA Self-adhesive Membrane 1000mm wide.
1 - 10 metre joint tape.
1 - Adhesive sealant cartridge.
2 - Internal corner pieces.
1 - 1 litre Primer.
1 - Roller to ensure adhesion of membrane.

Tanking membrane kit for wetrooms

Note: We can also supply MAXXUS kits for vinyl flooring where the stainless steel grid and tanking kit is not required.

MAXXUS Wetroom Kit Deck sizes

Kit designations are ML for Tanking compound MB for Membrane Sheet

Please Contact Us for prices and ordering

Note: All MAXXUS decks can be cut down or shaped on-site to suit your exact dimensions

MAXXUS decks are also available for Linear Channel Drains

Maxxus Load-Bearing Wetroom Deck Kits - Square shape

ML / MB 934
900 x 900mm

900m square maxxus wetroom deck

ML / MB 930
1000 x 1000mm

1m x 1m level access shower floor deck

ML / MB 936
1200 x 1200mm

4 foot square 1200 x 1200m shower floor deck for a wetroom

Maxxus Load-Bearing Wetroom Deck Kits - Rectangular shape

ML / MB 931
1135 x 770mm

rectangular wetroom shower floor former

ML / MB 1280
1200 x 800mm

rectangular wetroom shower floor former

ML / MB 929
1200 x 900mm

rectangular wetroom shower floor former

ML / MB 932
1300 x 800mm

wetroom floor deck load bearing to span joists

ML / MB 935
1400 x 900mm

Structual wetroom floor deck with drain

ML / MB 933
1500 x 800mm

Solid wetroom gradient former for wetrroms

ML / MB 1690
1650 x 900mm

rectangular wetroom shower floor former

ML / MB 1808
1800 x 800mm

Large wetroom shower area floor deck kit

ML / MB 1411
1450 x 1150mm

Maxxus structural solid load bearing wetroom floor with slope to drain kit